how to develop free website

SprutCAM

CAM Software Solution
For Your Manufacturing Needs 

2.5 Axis Milling

Article header with background image and parallax effect.

2.5D strategies are used for machining of parts composed of pockets, islands, slots, vertical sides, flat faces and holes. Typically these would be electronic component housings, stamps and dies. SprutCAM creates both roughing and finishing tool paths. SprutCAM includes powerful automatic geometry recognition. All types of hole machining operations are supported.

3 Axis Milling

Article header with background image and parallax effect.

The particularity of the 3D milling is that the tool can be moved simultaneously according 3 axes of the workpiece. In order to set these operations in SprutCAM, you need to have a 3D model of the workpiece.

5 Axis Continuous

Strategies for generation of the tool-path over the surface of the part

SprutCAM has 5 axis continuous strategies, which enables to create CLData for any type of multiaxis machines. The CLData is created taking into consideration the machine scheme, which permits to avoid collisions during the machining. The CLData is created taking into consideration the transformation of the co-ordinates of the machining.

Turning

SprutCAM permits to create NC programs for lathe machines with numeric control

SprutCAM contains a full set of strategies for turning machining of parts of any complexity, all the known turning cycles are supported.  

Turn-Milling

Turn-Mill module of SprutCAM includes powerful turn-milling methods to program multi axial machining with support Multi-tasking Turn-Milling centers

Easy interface and features of the lathe module the ability to program roughing, finishing, grooving, threading and part-off machining operations. 

Multi-Task Machining 

SprutCAM has the capability of programming of multitask turning machines with sub spindle (MTM)

SprutCAM has the capability of programming of multitask turning machines with sub spindle (MTM). It enables to create NC programs for simultaneous machining of several parts by multiple tools. 

SprutCAM Robot

A single environment for the offline programming (OLP) of industrial robots.

A single environment for the offline programming (OLP) of industrial robots. An efficient robot machining solution for the rapid creation of complex collision-free 3D movements in native 6 or more axes code (5 to 6 axis transformations are not required)

SprutCAM Robot supports programming of robots from Fanuc, Kuka, Staubli, Yaskawa Motoman, Toshiba, Mitsubishi, Nachi, ABB and many more.

SprutCAM Robot offers an extensive range of operations for 3-5 axis milling, debarring, trimming, cutting, welding and more.